Ultra Low Freezer ULF 600 PRO2


Ultra Low Freezer ULF 600 PRO2

Structure : upright type, realized in sheet
steel painted white colour (rust- and
corrosion-proof) outside and stainless
steel 18/10 AISI 304 inside
• Insulation : injected polyurethane a high
density, with a thickness of 130 mm. CFCfree
• Casters : Nr 4 made in rubber and
swivelling in order to make easy any
moving required. The castors mounted in
the front side are fitted up with brakes with
foot lever control to block them once the
freezer has been positioned
• Door : Nr. 1, hinged, fully insulated,
externally it is executed in the same
material of the structure (sheet steel
painted white colour) while internally it has
non-conductive material. A perfect
hermetic closing is assured through a
double gasket system, one, magnetic
mounted on the door itself and another
one, silicone type, mounted on the
structure of the freezer. The gaskets are
even provided with a special heating
system to prevent the freezing and thanks
to the vacuum-release valve the door can
be immediately re-opened a closing. In the right part of the door is mounted the
effort-free locking mechanism which
incorporate the safety key lock
• Inner doors : Nr 2, hinged, realized in
stainless steel 18/10 AISI 304 in the
external side and non-conductive material
in the internal one. The inner doors prevent air-cold loss at the external door opening and they are also provided with a
locking mechanism with a lever
• Internal equipment : Nr 3 storage shelves realized stainless steel 18/10 AISI 304 that divides the storage chamber in
4 compartments with dimensions (W x D x H) 75 x 59 x 31 cm each. The shelves are is mounted on brackets and they
can be easily adjusted in height or removed without the use of any tool. Shelf dimensions (W x D) 75 x 59 cm
• Control panel “PRO2” : located in the bottom part of the structure (under the door) is microprocessor operating with
soft-touchpads, LED display and warning lamps, allowing the control of all the functions and working status of the
freezer (including alarms). The control panel is battery operating in order to grant the functioning of the alarms even in
case of power failure. The main functions of the control panel are :
• Digital temperature adjusting and displaying with an accuracy of 0,5°C
• Warning lamp signalling when the cooling unit is ON
• Keyboard block with a password to avoid tampering from unauthorized persons
• Visual and acoustic alarm for high or low temperature with programmable limits
• Visual and acoustic alarm for door ajar, delayed of 30 seconds to allow the standard operations
• Visual and acoustic alarm for power failure
• Visual and acoustic alarm for dirty condenser that limit the cooling unit performances
• Visual alarm for discharged battery with the possibility to display the charging status
• Temporally muting of the acoustic alarms, with automatic re-activation in case the alarm conditions continues
• NO/NC contact
• RS 485
• Cooling unit : bottom mounted, compounded by Nr 2 hermetic compressors (cascade) with a power of 1 HP each, Nr
1 finned condenser, air cooled through a fan and special electro-valves. The cooling unit compartment is adequately
acoustically insulated to limit the noise level. Also, foamed into the insulation of all storage chamber walls, there are
the evaporating pipes, in order to grant the maximum temperature stability and uniformity. All the mounted
components are industrial grade to grant the maximum reliability
• Refrigerant : CFC-free
• Refrigeration : static, with evaporating pipes throughout all the chamber in order to grant maximum temperature
stability and uniformity
• Temperature range : infinitely adjustable between -60°C / -86°C
• Voltage (V/ph/Hz) : 220-230/1/50
• Plug : Schuko type
• Noise level (dB(A)) : ≤ 52
• Capacity (litres) : 600
• Dimensions (W x D x H cm) : 106 x 89 x 199
• Net weight (Kg) : 350
• Packed dimensions (W x D x H cm) : 127 x 107 x 225 (3,06 m³)
• Gross weight (Kg) : 39

Get a quote on this item