Super Deep Freezer PDF 270 x PRO

Super Deep Freezer  PDF 270 x PRO

• Structure : upright type, realized in sheet steel epoxy coated white
color both in- and outside or in stainless steel 18/10 AISI 304 both inand
outside. All the internal corners are rounded to make easy any
cleaning operations and the internal bottom is tray type to contain spills

• Insulation : high density (40 Kg/m³) foamed-in-place polyurethane, with
a thickness of 50 mm. CFC-free
• Rollers : Nr 4 made in plastic material, to make easy any moving
• Insulated door : Nr 1, hinged, made with the same material and
insulation as the rest of the structure (sheet steel epoxy coated white
colour or stainless steel 18/10 AISI 304 always both in- and outside). The
door is provided with a removable magnetic rubber gasket in order to
grant a perfect hermetic closing, reversibility facilities, to change the door
hanging and the closing profile is heated to avoid the gasket frosting. The
handle is flush-fitting type so does not increase the size of the
refrigerator. The door is also fitted with a spring loaded automatic closing
device for openings inferior 90° and special door switch that stops the
internal ventilation at the door opening (to limit the air cold loss) and light
the internal lighting at every opening

• Internal equipment : Nr 2, storage open wire shelves realized in sheet
steel with a strong plastic coating (rust-proof material). The shelves are
mounted on special anti-tilt stainless steel slides that allow the shelf
extraction and they can be easily removed and adjusted in height without
the use of any tool. The special internal racking-system allows a great
flexibility of the internal fitting with the possibility of interchange and
combine both shelves and drawers (drawers optionally available)
• Shelf dimensions (W x D cm) : 46 x 47
• Shelf loading capability (Kg) : 30 (with uniformly stored material)
• Internal lighting : Nr 1 bulb, mounted in the bottom part of the control
panel, with automatic activation at every door opening through a special switch
• Control panel “xPRO” : located in the top part of the structure (above the door), microprocessor operating, with
capacitive touch-buttons and colour display. The controller supervises all the appliance functions through the EEN
(EVERmed Easy Navigation) interface, with icons and written messages, allowing a very intuitive interactivity between
the appliance and the user, for an easy setting of all appliance functionalities according to needs and the control of the
workings status. The control panel is battery operating in order to grant the functioning of the display and alarms even
in case of power failure. The main functions panel are :
• High resolution 3,5” TFT colour display, LED backlit, showing the appliance working status (actual temperature,
compressor functioning, defrosting, alarm running, etc.) and allowing the surfing through the various controller
menu for setting and checking purposes
• Digital temperature displaying and adjusting with an accuracy of 0,1°C
• Keyboard touch-buttons with automatic block safety protection, to avoid tampering from unauthorized persons
• Dual-level safety access, with PIN code protections, on both ON/OFF switch and keyboard touch-buttons. Reprogrammable
PIN codes for increased security from access to the unauthorized personnel
• Back-up battery, with automatic recharging, granting till 48 hours autonomy for the control panel functioning in case
of power failure. The charging status is continuously shown on the display for immediate checking
• Visual and acoustic alarm signalling (with automatic resetting) for:
- high and low temperature, with limits programmable from the user through a dedicated menu
- door ajar, delayed of 2 minutes to allow the standard operations. Programmable alarm delay through a dedicated
- power failure
- battery discharged
- condenser dirty
- anti-freezing evaporator

Get a quote on this item