basic Laboratory Freezer BLF 70

• Structure : upright type, realized in sheet steel
epoxy coated white colour (rust-proof material)
outside and atoxic plastic material inside. All the
internal corners are rounded to make easy any
cleaning operations
• Insulation : high density (40 Kg/m³) foamed-inplace
polyurethane, with a thickness of 60 mm.
• Feet : Nr 4 feet, adjustable in height for levelling
• Insulated door : Nr 1, hinged, realized with the
same material and insulation as the rest of the
structure (sheet steel epoxy coated white colour
outside and atoxic plastic material inside). The
door is provided with a removable magnetic rubber
gasket in order to grant a perfect hermetic closing
and external handle
• Internal equipment : Nr 2 storage baskets, that
are provided with a plastic frontal part,
incorporating the handle, that acts as innerdoor as
close the space among the baskets, to avoid air
cold loss at the opening of the external door. The
baskets slides on fix in height supports fitted at the inner-chamber walls allowing the baskets extraction and provided
with stops facilities to prevent the basket falling down once extracted
• Control panel : located in the top part of the structure, above the door. The control panel is compounded by
temperature control leds and switches, temperature alarm indication and superfreezing switch
• Temperature control leds and switches : the appliance is provided with a series of illuminated LED with a list of
pre-programmed temperatures, in order to make easy the temperature setting operations though a special switch
• Alarm indication for high temperature : the appliance is provided with visual alarm indication for high
temperature. The visual signalling is through an warning icon on the display which appears if the temperature of the
freezer rise too much and goes automatically off if the temperature return within the safety level. The alarm limit is fix, not adjustable
• Superfreezing switch: activating the superfreezing function is possible to freeze new material in the shortest
possible time, till 22 Kg within 24 hours
• Cooling unit : Nr 1, bottom mounted, with a condensing unit compounded by Nr 1 hermetic compressor and Nr 1
condenser, air cooled, fixed in the cabinet rear and also, into the storage chamber the multi-level evaporator, foamed
into the insulation, wrapping completely the storage chamber (for a better temperature uniformity and stability). All the
used components are industrial grade granting the maximum reliability
• Refrigerant : CFC- and HCFC-free
• Defrosting : manual
• Refrigeration : static, but thanks to the evaporator fitted on three sides of the storage chamber, for the full height, it is
assured the internal temperature uniformity and stability
• Temperature range : adjustable between -15°C and -32°C with intermediate fix steps at -18°C, -21°C and -25°C
• Voltage (V/ph/Hz) : 220-230/1/50
• Plug : Schuko type
• Gross capacity (litres) : 75
• Net capacity (litres) : 70
• Dimensions (W x D x H cm) : 55 x 62 x 63
• Net weight (Kg) : 40
• Packed dimensions (W x D x H cm) : 65 x 72 x 85 (0,40 m³)
• Gross weight (Kg) : 50

Get a quote on this item